6319VV Series
Single-row deep groove ball bearings are the most common type of rolling bearing. The raceway grooves in the inner and outer rings form a circular arc with a radius slightly larger than that of the balls.
In addition to open varieties, these bearings may have steel shields or come pre-lubricated with grease maintained by rubber seals installed on one or both sides. Snap rings are sometimes used on the outside diameter of the outer ring.
Cages are generally made of pressed steel, though large bearings and bearings designed for high-speeds may use machined brass cages.
Features
- Support radial and axial loads
Single-row DGBBs can sustain radial loads and axial loads in both directions. - Proven performance
DGBBs are the most common type of bearing and are used in countless applications.
Applications
- Low noise/vibration applications
DGBBs provide low frictional torque and high rotational speed ideal for equipment where noise and vibration must be avoided. - Industrial motors, servomotors, stepper motors, electric machinery, agricultural machinery (tractors, string trimmers), textile machines, carriers/conveyance, film rolling mills, powder/particle clutches, outboard boat motors, etc.
| Designations | Basic Load Ratings | Radial Internal Clearance | Tolerance Class | Limiting Speeds | Number of Balls | Ball Diameter | Mass | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cr (N) |
C0r (N) |
min |
max |
Grease (min-1) |
Oil (Oil-bath) (min-1) |
(mm) | (inch) | (approx.) (kg) |
||||
| 6319VV | 168000 | 119000 | 3400 | 8 | 33.338 | 1.313 | 5.76 | |||||
Not to scale.
(*) The chamfer dimensions are minimum values.
6000N, 6000NR, 6001N, 6001NR : Snap ring groove dimensions and snap ring dimensions are not based on ISO 15.
| NSK Product Type2 | DGBB_SR |
|---|---|
| NSK Product Type | Bearing |
| Designations | 6319VV |